Chloride process
The chloride process is used to separate titanium from its ores. The goal of the process is to win high purity titanium dioxide from ores such as ilmenite (FeTiO3) and rutile (TiO2). The strategy exploits the volatility of TiCl4, which is readily purified and converted to the dioxide. Millions of tons of TiO2 are produced annually by this process, mainly for use as white pigments. The chloride process has largely displaced the older sulfate process, which relies on hot sulfuric acid to extract iron and other impurities from ores.[1]
Process chemistry
[edit]In this process, the feedstock is treated at 1000 °C with carbon and chlorine gas, giving titanium tetrachloride. Typical is the conversion starting from the ore ilmenite:[2]
- 2 FeTiO3 + 7 Cl2 + 6 C → 2 TiCl4 + 2 FeCl3 + 6 CO
The process is a variant of a carbothermic reaction, which exploits the reducing power of carbon.
Other impurities are converted to the respective chlorides as well, but most are less volatile than TiCl4. Vanadium tetrachloride and vanadium oxytrichloride codistill with TiCl4, but these impurities can be removed by chemical reduction.[1] The titanium tetrachloride is purified by distillation. It can be subsequently oxidized in an oxygen flame or plasma to give the pure titanium dioxide.[3][4]
- TiCl4 + O2 + heat → TiO2 + 2 Cl2
In this way, chlorine is recovered for recycling.
Process engineering
[edit]
The standard chloride process for titanium dioxide base material consists of the following main production units:[5]
- Oxidation
- Chlorination
- Condensation
- Purification
The following auxiliary production units are necessary:
- Ore/coke storage
- Off-Gas Treatment
- Dust treatment
Under steady state conditions the chloride process is a continuous cycle in which chlorine changes from the oxidized state to the reduced state and reverse. The oxidized form of the chlorine is molecular chlorine Cl2, the reduced form is titanium tetrachloride (TiCl4). The oxidizing agent is molecular oxygen (O2), the reducing agent is coke. Both must be fed into the process. The titanium is fed into the process in form of ore together with the coke. Titanium ore is a mixture of oxides. The added O2 leaves the process with the product TiO2, the added coke leaves the process together with the added oxygen from the titanium ore in form of CO and CO2. The other fed metals leave the process in form of metal chlorides.[6]
References
[edit]- ^ a b Völz, Hans G.; et al. (2006). "Pigments, Inorganic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a20_243.pub2. ISBN 978-3527306732.
- ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
- ^ "The TiO2 Process". Ti-Cons. Retrieved 2016-12-17.
- ^ Jones, Tony; Egerton, Terry A. (2000). "Titanium Compounds, Inorganic". Kirk-Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. doi:10.1002/0471238961.0914151805070518.a01.pub3. ISBN 9780471238966.
- ^ "Manufacture and General Properties of Titanium Dioxide Pigments" (PDF). Ti-Cons. Archived from the original (PDF) on 2011-01-24. Retrieved 2012-04-11.
- ^ "The Details of the TiO2 Process" (PDF). Ti-Cons. Retrieved 2012-04-11.
External links
[edit]- "Chloride Process". KRONOS Worldwide, Inc. Archived from the original on 2019-06-20. Retrieved 2020-05-11.
- "The Chloride Process from Ti-Cons". Ti-Cons Jendro, Weiland und Partner. Retrieved 2010-06-16.